Manufacturing High Quality Heat Shrinkable Films
for Packaging and Labeling Applications

 

Products

Heat Shrinkable Film Products Bonset

Bonset PETG Film Grade Descriptions

Bonpet 5A is a PETG heat-shrinkable film grade combining high overall shrinkage and excellent printability. The favorable film toughness and shrinkage character combine to make a film suitable for a wide variety of container shapes.
Bonpet 6L is a PETG film having a more moderate shrinkage capability than Bonpet 5A. The film exhibits approximately 30% less shrink force than 5A and a shrinkage curve similar to PVC. Bonpet 6L exhibits a slight amount of machine direction shrinkage which can be advantageous for certain container geometries.
Bonpet 7M is a high-yield heat-shrinkable PETG film. Bonpet® 7M provides a good balance of opacity and low specific gravity. These properties are achieved by introduction of microscopic voids within the film matrix. Due to the opaque nature of Bonpet® 7M, it must be surface-printed. Bonpet® 7M incorporates an antistatic coating which is on the outside surface of the film roll. The preferred side in which to print Bonpet® 7M is on the inside of the roll as supplied directly by Bonset America Corporation.
Bonpet 8A PETG film combines high overall shrinkage with significantly reduced shrink force. Bonpet 8A is ideal for applications where reduced contours on the label top and bottom are required (often referred to as smiling). In addition to its excellent transparency, Bonpet 8A offers a machine direction shrinkage curve exhibiting significant growth. This can potentially offer film savings for applications whose sleeve heights are often over-sized due to the inherent MD shrinkage associated with traditional PETG films.
Bonpet 8 Digital

An exclusive PETG heat shrinkable film designed for today's innovative digital printing.  This high-shrinkage co-polyester clear film was developed exclusively for commercial and industrial digital printing presses, with shorter rolls to hand the smaller press specs.  And as with the toughness of any other Bonpet product line, it can be used for tamper-resistant product seals all the way to full-body sleeves produced with the rich color finish digital presses are known for.  B8D utilizes a specifically designed primer coating which imparts excellent printability.  The primer coating is oriented on the outside film of the surface.  In addition, B8D has been certified with the Rochester Institute of Technology.

HP/RIT Labels & Packaging Substrate Evaluation Report ws6000 series

HP/RIT Labels & Packaging Substrate Evaluation Report ws4050

HP/RIT Labels & Packaging Substrate Certificate ws6000 series

HP/RIT Labels & Packaging Substrate Certificate ws4000 series

Bonpet 10  A high overall shrinkage PETG grade, exhibiting a slower shrink curve, reduced shrink force, and MD shrinkage relative to conventional PETG shrink films grades.  B10 incorporates an anti-static coating wound on the outside surface of the roll.

Bonpet 1U

A PETG film possessing the same shrinkage behavior as B10 while incorporating an optical brightening additive.  B1U is ideal for applications requiring tamper-evident capability.  B1U incorporates an anti-static coating wound on the outside surface of the film roll.

Bonpet WI A moderate shrinkage PETG film offering a PVC-like shrinkage curve. Bonpet® WI utilizes a UV-inhibitor additive to provide protection for the film and container contents from ultraviolet light.
  

Other Shrink Film Products

Shrink Film PVC Shrink Film SBS OPS

Product Search

 

Contact Information

Bonset America Corporation
6107 Corporate Park Drive
Browns Summit, NC 27214
Phone: 336-375-0234
Fax: 336-375-6129

Contact Us

Shrink Films

Heat Shrinkable Film Products Bonset

News

3/26/2017
Bonset to Exhibit at Interpack Dusseldorf May 4 -10, 2017...
10/16/2016
Bonset America Exhibiting at PackExpo Intl Nov 6th - 9th...
9/2/2016
Bonset America Co-Exhibits with Karlville at LabelExpo 2016...
View All News